Garmin cadence gsc 10 manual

GSC 10 Specifications. Battery type. User-replaceable CR, 3 volts. Battery life. Approximately years (1 hour per day) Water resistance. IPX7. Operating temperature range. From 5º to ºF (from º to 70ºC)Battery life: Approximately years (1 hour per day). Installing the Cadence Sensor; Pairing the Sensors with Your Device; User Replaceable Batteries; Replacing the Speed Sensor or Cadence Sensor Battery; Limited Warranty; Speed Sensor and Cadence Sensor Specifications. Garmin Support Center is where you will find answers to frequently asked questions and resources to help with all of your Garmin products.

If you need to buy the full GSC, here is a amazon link: www.doorway.ru=as_li_tf_tl?ie=UTF8camp=creative=creati. Installing the GSC 10 Both magnets must be aligned with their respective indication lines. 1. Place the GSC 10 on the rear chain stay (on the side opposite the drive train). Loosely attach the GSC 10 using two cable ties. 2. Attach the pedal magnet to the crank arm using the adhesive mount and a cable tie. The pedal magnet must be within 5 mm. Press the Reset button on GSC 10 (the white button) Wait for Reset button to flash red/green. Select Yes under Bike sensors present? Select Rescan. Pedal bike to see alternating red/green blinking on reset button. The speed/cadence icon will show unblinking on the main menu when pairing is successful. Contact.

changes in the content of this manual without obligation to notify any ANT™, ANT+™, Garmin Connect™, and GSC™ 10 are CaDEnCE (foot pod or GSC Quick Links · 1. Unscrew and move the sensor arm to within 5 mm of the. spoke magnet. You can also tilt the GSC10 closer to either. magnet for improved alignment. View and download the Manual of Garmin Edge Bike Computer (page 1 of 60) (English) Heart Rate Monitor and GSC 10 GSC 10 speed and cadence sensor.